Outdoor Series
Outdoor TDD eNodeB_Microcell
Model: 44332
The 44332 eNodeB (eNB) is an advanced dual carrier (DC) outdoor Long-Term Evolution (LTE) product that operates in Time Division Duplexing (TDD) mode. This eNB provides users with high-speed broadband wireless access to the Internet using 2*20W output power (2x2 MIMO with 20W output each channel). This eNB is capable of operating in Dual Carrier (DC) or Single Carrier mode.
In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and each supporting 5, 10, 15, or 20 MHz bandwidth. Using a 44332 in DC mode simplifies and streamlines the deployment of split sectors.
Product Details
Standard LTE TDD Bands 38/40/41/48
Customization may be requested
Complies with 3GPP Release 12 standards
Support two carriers
Supports 5/10/15/20 MHz bandwidth per carrier and their combinations
GUI-based local and remote Web management
TR069 network management interface support
Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPSec)
External high-gain antenna
Higher transmission power for extended coverage
Cloud /Local/Embedded EPC is supported for more convenient and economic deployment
Excellent non-line-of-sight (NLOS) coverage performance
Peak rate (per unit): DL 220 Mbps, UL 28 Mbps @ 2x20 MHz bandwidth
192 concurrent users per eNodeB
Supports Citizens Broadband Radio Service (CBRS)
Support RET function AISG 2.0
IoT with all standard LTE Evolved Packet Core (EPC)
Lower power consumption to reduce OPEX, can be powered easily by Prevail compact outdoor Smart UPS series
Specification
Hardware Specifications | |||
LTE Mode | TDD | ||
Frequency Bands | 38/40/41/48 and customized | ||
Channel Bandwidth | 5MHz, 10MHz, 15MHz, 20MHz 5MHz+5MHz 10MHz+10MHz, 20MHz +20MHz 20MHz +10MHz, 20MHz +15MHz | ||
Max Output Power | 43 dBm / channel | ||
Power Supply | -48V DC, AC adaptor (multi-national standards) | ||
Power Consumption | < 200W | ||
Receive Sensitivity | -102 dBm | ||
Synchronization | GPS, 1588v2 | ||
Interfaces | One optical (SFP) and one RJ-45 Ethernet interface (1 GE) | ||
MIMO | DL: 2x2 on each carrier | ||
Installation | Pole or wall mount | ||
Antenna Type | External high-gain antenna compatible with eNB N type connectors | ||
Dimensions (HxWxD) | 17.3 x 9.5 x 5.5 inches 440 x 240 x 140 millimeters | ||
Weight | 26 lbs / 12 kgs | ||
MTBF | ≥ 150000 hours | ||
MTTR | ≤ 1 hour | ||
Software Specifications | |||
LTE Standard | 3GPP Release 12 | ||
Peak Rate (up to) in DC mode
SA0: config. 0 (DSUUU) SA1: config. 1 (DSUUD) SA2: config. 2 (DSUDD) | 2x20 MHz: | DL (Mbps) | UL (Mbps) |
SA0 : | 2x50 (100) | 2x42 (84) | |
SA1 : | 2x80 (160) | 2x28 (56) | |
SA2 : | 2x110 (220) | 2x14 (28) | |
2x10 MHz: | DL (Mbps) | UL (Mbps) | |
SA0 : | 2x25 (50) | 2x21 (42) | |
SA1 : | 2x40 (80) | 2x14 (28) | |
SA2 : | 2x55 (110) | 2x7 (14) | |
User Capacity | 96 concurrent users in single carrier mode 96+96 concurrent users in DC mode | ||
QoS Control | 3GPP standard QCI | ||
Modulation | DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM, 64QAM | ||
Voice | VoLTE, Circuit Switched Fallback (CSFB) | ||
Traffic Offload | Local breakout | ||
SON | Self-organizing network: n Automatic setup n Automatic Neighbor Relation (ANR) n PCI confliction detection | ||
RAN Sharing | Multi-Operator Core Network (MOCN) | ||
RET | Supported | ||
Network Mgmt | TR069 | ||
Spectrum Scanning | Supported | ||
UL Interference Detection | Supported | ||
Maintenance | n Remote or local maintenance n Online status management n Performance statistics n Fault management n Local or remote software upgrade n Logging n Connectivity diagnosis n Automatic start and configuration n Alarm reporting n User information tracing n Signaling trace | ||